Motorcycle Riding the Blue Ridge Parkway – Commuter Zones

Riding the Blue Ridge Parkway - commuter zones

You have no clue you’re passing through some sizable cities on a Blue Ridge Parkway ride  – 10 minutes ride from a parkway exit puts you in the heart of Asheville, NC, a fun place to visit!

On a 469 mile long Blue Ridge Parkway ride you will pass through two cities – Roanoke in Virginia, and Asheville in North Carolina. Each has its “commuter zone”.

In both cities, the parkway weaves along the east edge of town then curves around to the south, though barely a hint of the surrounding neighborhoods are visible. Riding along you never see a downtown area at all nor any indication you are near a sizable city. It’s part of the magical illusion of a Blue Ridge Parkway ride. The views have been well protected over the years.

What’s a Commuter Zone?

There will be a handful of exits relatively close together as you pass through one of the cities on the Blue Ridge Parkway. For locals, the Blue Ridge Parkway is just one more road to get through town, a shortcut. A lot of local traffic hops on it to save time and zip an exit or two to the road they want.

photo-no-gas-sign-on-blue-ridge-parkway

This sign is a legacy to when gas was available on the Blue Ridge Parkway. It should now read “No gas next 400 miles”. There is no gas on the Blue Ridge Parkway. Take advantage of close gas stations to the parkway in the commuter zones.

What you need to know about Parkway Commuter Zones –

Expect more traffic and more aggressive traffic in the commuter zones on the Blue Ridge Parkway. Locals are hopping on the parkway to save time and they may push the speed limit.

The speed limit drops in some areas and it’s more heavily enforced in the commuter zones. The Asheville commuter zone of the Blue Ridge Parkway went to 35 mph last year to try to slow down the local traffic. Watch for the signs.

Enforcement is heavier near cities, especially in commuter zones. More traffic means more resources assigned to deal with it. Watch your speed whenever you feel you are getting into a populated area. You can also expect more attention near popular areas along the Blue Ridge Parkway.

ranger on the parkway

Watch your speed and be alert in the commuter zones

Here are some places where I tell myself to roll back on the throttle when riding the Blue Ridge Parkway:

  • From the Start of the Parkway  in Virginia to Humpback Rocks
  • Peaks of Otter area in Virginia, near Buchanan
  • From 221 exit to 221 exit near Roanoke
  • Linn Cove Viaduct area near Blowing Rock
  • Moses Cone / Julian Prince Park near Boone
  • Altapass Hwy north of Spruce Pine / Little Switzerland
  • Crabtree Falls area
  • From Craggy Gardens through Asheville
  • The southern section of the parkway into Cherokee

Be aware of and alert for these commuter zones near the cities along the Blue Ridge Parkway. There are few signs on the road, but if you see any indication you are approaching a congested area be alert and ready to deal with increased traffic with a different agenda than you.

7 map Blue Ridge Parkway + The Dragon set

7 map Blue Ridge Parkway + The Dragon set

Get the maps!
http://shop.americaridesmaps.com/Blue-Ridge-Parkway-The-Dragon-Package-BRP12.htm

If you enjoy photos of motorcycle riding in the Blue Ridge and Smoky Mountains, like MY BLUE RIDGE MOTORCYCLING FACEBOOK PAGE.Facebook

____________________________________________________________________

wayne busch - Smoky Mountain Motorcycle Rider.com

Wayne Busch

– Wayne Busch lives in Waynesville, NC, where he produces the most detailed and comprehensive and up-to-date motorcycle pocket maps of the Blue Ridge and Smoky Mountains to help you get the most of your vacation experience. See them here – AmericaRidesMaps.com

____________________________________________________________________

Motorcycle Riding on the Blue Ridge Parkway – Safety Tips

Motorcycle Riding on the Blue Ridge Parkway – Safety Tips
Courteous Passing  and Signal your intentions

I’m opening myself up for some criticism by posting this, but when motorcycle riding on the Blue Ridge Parkway and you need to pass, one safety tip I’ve found helpful is using better communication and courteous passing. While passing may be illegal, it’s a frequent occurrence. Here’s how I deal with it.

Why take the criticism? Because I see it so often – it’s a rare stretch of the 469 mile long Blue Ridge motorcycle ride that isn’t painted with a double yellow line. Passing zones are few and far between. Crossing the double yellow line is breaking the law, so consider that before you do it. If something goes wrong, you’re at fault, and any ticket you get is deserved.

Motorcycle Riding on the Blue Ridge Parkway - Safety Tips Courteous Passing  and Signal your intentions - Crossing the double yellow line is illegal. Legal passes are safe passes.

Motorcycle Riding on the Blue Ridge Parkway – Safety Tips – Courteous Passing and Signal your intentions – Crossing the double yellow line is illegal. Legal passes are safe passes.

Still, I can’t recall a recent motorcycle ride on the Blue Ridge Parkway where it didn’t happen. It’s a common situation as the comfortable travel speed for many car drivers is around 35 mph on this mostly 45 mph road. While most bikers are content to adapt to the lower speed and relax and enjoy the scenery, the situation can get frustrating when the curves get tighter.

Motorcycles and cars approach curves differently. Cars tend to get off the throttle and slow down when going through a turn. Motorcycles want to be on the gas to gain traction, ground clearance, and stabilize the bike in a turn. Applying the brakes when behind a car in a turn makes the motorcycle want to stand up when it should be leaning and it’s harder to steer and more unstable.

Motorcycle Riding on the Blue Ridge Parkway - Safety Tips - Courteous Passing and Signal your intentions - There are lots of overlooks through the most scenic sections. Use your signal lights to communicate to the driver ahead.

Motorcycle Riding on the Blue Ridge Parkway – Safety Tips – Courteous Passing and Signal your intentions – There are lots of overlooks through the most scenic sections. Use your signal lights to communicate to the driver ahead.

In a perfect world, you follow along to the next pull-out, the car slips in and lets you by. Give the driver that opportunity, it’s the best, safest, and legal option. A lot of times that happens. Sometimes it takes a couple overlooks before the driver recognizes the easy solution.

Just as often though, you’ll come up on a car which slows and starts waving you by to make an illegal pass. Here’s how I approach it –

  • If you don’t want to pass, drop back and give the car some space.
  • If you do want to pass, but it’s not safe here due to an approaching curve, limited visibility, or other traffic, be courteous and work with the driver. Drop back a little and signal your intent that you do want an opportunity to pass by using your turn signal.

Communicating to the driver by using your turn signal lets him know your intent and you can work together to make the pass as safe as possible.

The driver may wait for the next pull off, give him the opportunity to use it, as it’s safest for everyone and the legal way to do it.

Motorcycle Riding on the Blue Ridge Parkway - Safety Tips - Courteous Passing and Signal your intentions - Choose your passing spots carefully and wisely.

Motorcycle Riding on the Blue Ridge Parkway – Safety Tips – Courteous Passing and Signal your intentions – Choose your passing spots carefully and wisely. This is hardly the place to even consider it. Wait patiently for those sections where you have a long view ahead and plenty of road before the next curve.

If you do choose to pass, do it politely and with some respect. Don’t blast by at warp speed with the pipes screaming. Stay in as high a gear as you can and make it a smooth and controlled quiet pass. Wait for a long enough section of road with clear visibility and enough margin for safety so you don’t convince the driver all bikers are dangerous and out of control or end up proving it as well. I usually give a wave of thanks to those who let me slip by, I appreciate their courtesy and respond in kind.

In summary;

  • Use passing zones when available
  • Crossing the double yellow line is illegal
  • Give the car a chance or two to exit into an overlook and let you by
  • Communicate with the driver by using your turn signals
  • Wait for a safe opportunity
  • Pass quietly and with respect
Motorcycle Riding on the Blue Ridge Parkway - Safety Tips - illegal passing is not without risks and potential consequences!

Motorcycle Riding on the Blue Ridge Parkway – Safety Tips – Illegal passing is not without risks and potential consequences!

At some point on your Blue Ridge Parkway motorcycle ride you’re going to be presented with this dilemma – to pass or not to pass. There’s a darned good reason crossing the double yellow line is illegal, it’s dangerous! In a dangerous situation one of your best tools is good communication. Use those signal lights and show some thanks if you decide to take a ride on the wild side of the line. A lot of times, seeing your signal lights alerts the driver and results in a safe and legal passing event and a better Blue Ridge Parkway ride for everyone.

These tips work with bicycles as well, be kind and let’s all enjoy our ride!

See the Blue Ridge Parkway Park Service Safety Page

See the Blue Ridge Motorcycling Parkway Safety Tips Page

—————————————————————————–

Wayne Busch

Wayne Busch – Cartographer

Total Rider Tech Logo

Learn Total Control

____________________________________________________________________
– Wayne Busch lives in Waynesville, NC, where he produces the most detailed and comprehensive and up-to-date motorcycle pocket maps of the Blue Ridge and Smoky Mountains to help you get the most of your vacation experience. See them here – AmericaRidesMaps.com

Wayne is an advanced motorcycle instructor for Total Rider Tech teaching Lee Parks Total Control Advanced Rider Courses. Isn’t it time you looked into advanced rider training to ride more confidently and safely? It can transform your mountain riding experience.  Total Rider Tech

____________________________________________________________________

Motorcycles use caution – Rocks and Ice on the Blue Ridge Parkway

Early spring means early season motorcycle riding on the Blue Ridge Parkway, but nightly freezes cause lots of small rock slides.

photo-rocky-section-along-blue-ridge-parkway

Rocky sections along the parkway are prone to slides

The National Park Service has done an outstanding job keeping the Blue Ridge Parkway open through the winter season as much as possible. I can’t remember spending as much time up there on my motorcycle, usually I’m on skis this time of year.

photo-rocky-section-along-blue-ridge-parkway

Rocks in the road are a common hazard

Warm and sunny days through this mild winter often find me pointing my wheels to the high country to take advantage of the nearly empty scenic road as it carves along the high ridge tops more than 5000 ft in elevation. Clear winter skies mean you can see into the surrounding states on the horizon, and the naked trees reveal what is hidden in the forested valleys spread out below.

photo-rocky-section-along-blue-ridge-parkway

If you see evidence of a large slide, be alert for the smaller ones which often follow.

Once darkness comes, the temperatures dive below freezing and sheets of ice build on the wet rock faces that line the roadway. As the sun warms them the next day, the ice melts and rains down along the roadside, and the repetitive freezing and melting cracks and loosens the rocks above causing small slides.

photo-rocky-section-along-blue-ridge-parkway

When the sun hits the rocks, the ice quickly melts and falls.

The park service is quick to remove the bigger slides as they occur and you’ll see the piles of rock pushed to the roadside. Throughout the day the process continues and it’s not uncommon to find rocks in the road when the road carves along the rocky cliffs.

photo-rocky-section-along-blue-ridge-parkway

Rocks, ice, and water litter this section of the road

Be alert whenever you see exposed rock along the roadside, particularly when rounding shady curves. The road may be clear where the sun rarely reaches, but as you come into the sunny side there may be surprises in the road.

1 minute video shows how noisy and active the melting and falling ice can be. It’s worth a stop to watch the spectacle.

__________________________________________________________________

Wayne Busch

Wayne Busch - Cartographer

Total Rider Tech Logo

Learn Total Control

– Wayne Busch lives in Waynesville, NC, where he produces the most detailed and comprehensive and up-to-date motorcycle pocket maps of the Blue Ridge and Smoky Mountains to help you get the most of your vacation experience. See them here – AmericaRidesMaps.com

Wayne is an advanced motorcycle instructor for Total Rider Tech teaching Lee Parks Total Control Advanced Rider Courses. Isn’t it time you looked into advanced rider training to ride more confidently and safely? It can transform your mountain riding experience.  Total Rider Tech

____________________________________________________________________